Skip to content
Emergency callout? Call 0435 591 549
OTOLECOTOLECElectrical

Ocean to Outback · WA EC16326

EV Charger Installation in Perth Hills

A dedicated EV charger charges your car faster than a standard power point, but it adds a large new load to your property. In WA your installer has to check that load against your connection before the charger is switched on. OTOLEC is a licensed EV charger installer based in Chidlow, working across the Perth Hills, Perth metro and rural WA.

  • Licensed electrical contractor

    WA EC16326

  • Locally based

    Chidlow, Perth Hills

  • Metro & rural WA

    Homes, business, farms

  • Emergency callouts

    Call 0435 591 549

  • Free quotes

    No obligation

Will my connection handle it?

A standard Western Power connection allows up to 63 A single-phase or 32 A per phase three-phase. Western Power gives a 7 kW single-phase charger as an example that fits a standard connection. Before installation, your EV charger installer calculates the property's maximum demand with the charger added. If there isn't enough capacity, the options are a connection upgrade or a smart charger that limits how much it draws from the grid.

Electrical switchboard with labelled circuits and RCBOs

What the network requires

  • The main switch must be a circuit breaker for EV charging connections, so older switchboards may need an upgrade first
  • The network operator must be notified before the charger is connected and switched on
  • Bidirectional chargers (vehicle-to-home or vehicle-to-grid) count as embedded generation and need Western Power's written approval

What's included

  • Maximum demand check against your connection
  • Switchboard and main switch assessment
  • A dedicated circuit and charger installation
  • Network notification and an Electrical Safety Certificate
  • Testing and a run-through of the charger

Home and business

At home, think about where you park, how far the charger is from the switchboard, and whether you plan solar or a second EV. For businesses, offices and units, new buildings in WA have had to include "EV ready" provisions since 1 May 2025.

Ready to talk through your job?

How it works

01

Call or request a quote

Start with a call or your contact details. We discuss the service, your location and the work involved. Quotes are free and without obligation; urgent electrical concerns should always be raised by phone.

02

Arrange a visit

Confirm availability, access and what needs assessment. Mention equipment, planned changes and any constraints that affect attendance. We'll arrange a time that suits you.

03

Agree the work

The existing installation and proposed scope are assessed before the work proceeds. Discuss any changes to the requirements so the job reflects your property and the electrical work that is actually needed.

04

Tidy up and test

Completion includes attention to the work area and testing of the electrical work performed. Ask any questions about the installed fittings, controls or repair before considering the job complete.

Based in Chidlow

Find your local service

Based in Chidlow, OTOLEC services homes, businesses and rural properties across the Perth Hills, Perth metro and rural Western Australia. Choose your suburb below to read about the service locally, or call about a location not listed. Coverage and attendance are discussed for your actual job.

Your questions answered

What size EV charger can I have?

It depends on your connection and existing load. A 7 kW single-phase charger fits a standard connection, but your installer has to check the maximum demand first.

Do I need a switchboard upgrade for an EV charger?

Western Power requires the main switch to be a circuit breaker for EV charging. If yours is an older switch, it will need upgrading.

Can I install a vehicle-to-home charger?

Yes, with approval. Bidirectional chargers need an embedded generation application and written approval from Western Power before connection.

Is OTOLEC a licensed EV charger installer?

Yes. OTOLEC holds WA Electrical Contractor Licence EC16326.

Do you travel to Perth Hills for EV charger installation?

Yes. OTOLEC services the Perth Hills, Perth metro and rural WA from Chidlow.

Official guidance

Related services

Perth Hills landscape with power poles at dusk

Need a hand with your electrical?

Let’s talk about your job.

Call 0435 591 549

Emergency and after-hours callouts: call to confirm availability.

  • Licensed WA EC16326
  • Fast, local response
  • Obligation-free quotes

Get an obligation-free quote

5-star rated on Google
Rapid responseHomes & businessesRural properties

Enquiring about: EV charger installation

Your details are only used to respond to your enquiry. No spam, ever.

If direct sending isn’t available, we’ll open a prepared email for you to send. For urgent work, call 0435 591 549.

Call Now